Lots of stuff once again

[LyleG]

All prices are in US dollars and have to be paid through paypal and include shipping to US or Canada. All offers will be considered or I may tell you to pound salt

Tad Moore iron heads lefthanded 3-pw paintfill removed 8-10 shape were $50 a head new, heres alink to them Global Golf - Tad Moore Forged Irons
I want $115 for the set

Lefty Ping G2 driver 8.5* UST V2 65 R flex 44 inches includes head cover 9/10 - $100

Lefty TaylorMade r5tp 9* sk fiber pure energy R flex 44 inches no head cover 9/10- $80

lefty r7425tp fuji tour spec spd 671-te X flex (shaft was tour only and worth $400) 43.5 inches comes with headcover and tp weight kit 8/10 has a scratch on rear end near the bottom which has been touched up- $200

Accuflex Creation shafts 3 pack - 2 creation 80 ions S flex one played 41 inches in a 5 wood the other 42 inches in a 3 wood. 1 creation 65 ion S flex played 44 in TM r7425tp. You can easily add up to a 1.5 inch extension to these if you need them longer. $150 for all 3 in MINT shape

Accuflex Icon (original not the V2) retailed for $290. X flex, played 44.5 in a driver $65

Fuji zcom MW54 X flex played 43.5 in driver mint shape - $65

Fuji Rombax tourspec 7V05 (japan tour issue) X flex, has a 3/4 inch extension in it and played 43 inches in a 3 wood $50

Ping G2 irons (right handed) set was a seniors/womens design soft reg graphite shafts 4-5HL irons 7-8-9-PW are normal G2 excellent shape $170

Project X 6.0 iron shafts cut to TLT series 4 all tip prepped, and will also include an uncut px 6.0 2 iron and sw shaft. This would retail for $300 new, I am asking $115

TTDG X100 TLT series 4 (for a 34 inch WTF measurement) all tip prepped includes SW and LW shafts, so 10 in total SOLD

[/b] Speeder 757 - tp graphics - played 44.5 in driver regular flex- $50 shipped

Scotty Cameron studio stainless 2.5 - left handed - golfpride grip (orange) includes headcover. $145 shipped


Bang Bangster head left handed 10.5* includes HC $50

Lefty GEEK dct 7* (head reads 6 but measures 7) .5* open face with HC - $65


TT dynalite gold super light series 4 tlt lengths 3-pw, sw (for a 34 inch WTF measurement), 9 shafts mint shape - $65

[dave.]

Lyla, I will take first baggsie on the X100s, I have a series 5, I said to Dan my wtf was 34.4 right and 34.2 left, but my wife has since done it properly and its 34 for both. I think I was on the cusp of 4 and 5, and wouldn't mind the 4 to test. I will use the same lie angles. I know its something I should pay for, so I won't be cheeky and ask for the series 4 specs, but could you tell me the liew angles of the 4,7 and wedge, for comparison?

[LyleG]

Dave,

see PM

[dave.]

ta

will use Paypal, how much postage to blighty matey?

[LyleG]

I will have to find that out on Monday Dave, I have no idea what shipping will be to that barron wasteland of a country you live in. Just PM me your addy and I will ship them Monday and then give you the total. I am guess it will be like $10 buck extra tops.

[dave.]

ta, pm sent

[maywb]

Any tipping on the creation shafts? Grips? Can you tell me what the lengths of the shafts are as they may be too short for me. Thanks.

[LyleG]

Originally Posted by maywb

Any tipping on the creation shafts? Grips? Can you tell me what the lengths of the shafts are as they may be too short for me. Thanks.

I can add up to 1.5 inches for you to the Creations without changing the way they play. They havent been tipped and will have golf pride tour velvets on them.

[maywb]

To play 43 inches in my TEE 3 wood, the 80 gram shaft would have to be 42.25 inches from tip to end of grip. I'm not sure your's would make this. How long is it now without any extension? I assume that the 65 is 42 inches as most TM TP drivers have a BBGM of 2 inches, but please correct me if wrong. Sorry for all of the questions, but if I'm going to buy, I want to make sure that I could at least use these shafts.

Also, any comparison to the Accuflex Evo?

Thanks.

[Rockford35]

Originally Posted by maywb

Also, any comparison to the Accuflex Evo?

Thanks.

The Creation 80 and the Evo are night and day. The Creation is a much smoother shaft with a softer tip section and more active through the swing.

The EVo is super tip stiff and butt soft, which makes it a very unique shaft to say the least. It's either a love it or hate it shaft. I happen to love it.

R35

[maywb]

Thanks, that's what I was hoping for as I personally hated the Evo.

[LyleG]

maywb

the 65 is 41.5 inches with an extension I can make it 43 inches
one 80 is 40 inches and can be extended to 42.5
the other 80 is 40 inches and can be extended to 41.5

I will add the extensions and grip the shafts if you are interested.

[hack daddy]

what condition is the putter in , can you send a photo.

[LyleG]

Hack

Heres a link to a thread I have photos of it in. It is in excellent shape.

My new (self modded) scotty - GolfWRX.com

[LeftyHoges]

Originally Posted by LyleG

Tad Moore iron heads lefthanded 3-pw paintfill removed 8-10 shape were $50 a head new, heres alink to them Global Golf - Tad Moore Forged Irons
I want $115 for the set

lefty r7425tp fuji tour spec spd 671-te X flex (shaft was tour only and worth $400) 43.5 inches comes with headcover and tp weight kit 8/10 has a scratch on rear end near the bottom which has been touched up- $200

Accuflex Creation shafts 3 pack - 2 creation 80 ions S flex one played 41 inches in a 5 wood the other 42 inches in a 3 wood. 1 creation 65 ion S flex played 44 in TM r7425tp. You can easily add up to a 1.5 inch extension to these if you need them longer. $150 for all 3 in MINT shape

Accuflex Icon (original not the V2) retailed for $290. X flex, played 44.5 in a driver $65

Fuji zcom MW54 X flex played 43.5 in driver mint shape - $65

Scotty Cameron studio stainless 2.5 - left handed - golfpride grip (orange) includes headcover. $145 shipped

Lefty GEEK dct 7* (head reads 6 but measures 7) .5* open face with HC - $65

Damn you Lyle! Postage from Canuckland would kill anything anyway.... *sigh*