Ping Rapture built crapture! - Shot Talk

**ManchesterGolfer** · iTrader: (0) #1 (**permalink**) 02-26-2007, 02:59 PM

So I'm at the range tonight trying to get this Rapture Dialed in (which I'm struggling a bit with tbh) when I noticed that the badge on the rear had come off. I know it was on at the start of my session but half way through I turned it over to clean it and noticed the badge had gone and there was a hole in the carbon fibre where it should be. I couldn't find it anywhere so I will be taking it back to the shop tomorrow to see what they will do about it.

**warbirdlover** · iTrader: (0) #2 (**permalink**) 02-26-2007, 03:30 PM

You must have hit it too hard!! I've played a couple rounds with mine and have not had a problem. I believe they'll make good on it. Tell them you want a new one!! If it were me I would. For as much as they get for these things they should last forever. (hint: position the ball just "inside" your left heel.)

**ThatCanadianGuy** · iTrader: (0) #3 (**permalink**) 02-26-2007, 04:30 PM

See if they can do something with that ugly spot on the crown of the club.

If It wasn't for that spider web thing I might come close to likeing the looks of the driver.

So I guess everyone is saying 'crapture' now

**ManchesterGolfer** · iTrader: (0) #4 (**permalink**) 02-26-2007, 04:32 PM

Not a good luck

Rockford35 · iTrader: (5) #5 (**permalink**) 02-26-2007, 05:07 PM

That is horseshit.

Send that POS back to Ping and buy an FT-5.

Garbage. Inexcusable. Rubbish.

R35

PS....(i could care less, this was just to get a rise outta WBL...LOL...

)

fore142 · iTrader: (0) #6 (**permalink**) 02-26-2007, 05:13 PM

well, it is a ping... what do you expect???

although we established in a another thread that pings are built to last, so maybe you got the crappy one of the bunch?

Rockford35 · iTrader: (5) #7 (**permalink**) 02-26-2007, 05:14 PM

Ya....you'll never get the head off, but the medallions, they fall off at the range, first bucket!

R35

**warbirdlover** · iTrader: (0) #8 (**permalink**) 02-26-2007, 05:51 PM

Quote:

See if they can do something with that ugly spot on the crown of the club.

If It wasn't for that spider web thing I might come close to likeing the looks of the driver.

ThatCanadianGuy

Well if you'd pick one up you'd find you can only really see that spider web when a flash from a camera shows it. The top is transparent and normally you don't see it. So now you can like it.

Quote:

That is horseshit.

Send that POS back to Ping and buy an FT-5.

Garbage. Inexcusable. Rubbish.

R35

PS....(i could care less, this was just to get a rise outta WBL...LOL...

)

My skin is getting much too thick for that to work anymore!! (But if the medallion comes off mine I WILL trade it in for a FT-5!!!)

I just had to go check my Rapture's "medallion" and all I can say is that puppy ain't coming off!!

.

.

**mont86** · iTrader: (3) #9 (**permalink**) 02-26-2007, 06:38 PM

Quote:

Originally Posted by ManchesterGolfer

So I'm at the range tonight trying to get this Rapture Dialed in (which I'm struggling a bit with tbh) when I noticed that the badge on the rear had come off. I know it was on at the start of my session but half way through I turned it over to clean it and noticed the badge had gone and there was a hole in the carbon fibre where it should be. I couldn't find it anywhere so I will be taking it back to the shop tomorrow to see what they will do about it.

Sounds like manchesterGolfer is setting up Ping threads for WBL.
WBL how low is that?...

..In a few minutes WBL will say BUY A PING...BUY A PING..

MG I love your avatar...Hey you guys does my but look too big?

**Jules150** · iTrader: (0) #10 (**permalink**) 02-26-2007, 07:55 PM

Quote:

Originally Posted by Rockford35

Ya....you'll never get the head off, but the medallions, they fall off at the range, first bucket!

R35

Hey, maybe that means they use a different epoxy!

**warbirdlover** · iTrader: (0) #11 (**permalink**) 02-26-2007, 08:11 PM

Quote:

MG I love your avatar...Hey you guys does my but look too big?

mont86

Speak English mont!! What are you trying to say?

**ThatCanadianGuy** · iTrader: (0) #12 (**permalink**) 02-26-2007, 08:38 PM

Quote:

Originally Posted by warbirdlover

Well if you'd pick one up you'd find you can only really see that spider web when a flash from a camera shows it. The top is transparent and normally you don't see it. So now you can like it.

I picked one up in Golf Central and It was the first thing I noticed. I tried to rub it off not knowing it was actually supose to be there.

So I will still never buy one.

fore142 · iTrader: (0) #13 (**permalink**) 02-26-2007, 09:20 PM

Quote:

Originally Posted by warbirdlover

Speak English mont!! What are you trying to say?

uh, i think thats pretty straight forward...

**warbirdlover** · iTrader: (0) #14 (**permalink**) 02-26-2007, 10:18 PM

Did mont mean "Does my butt look too big"?

MCDavis · iTrader: (2) #15 (**permalink**) 02-27-2007, 08:09 AM

Quote:

Originally Posted by warbirdlover

Did mont mean "Does my butt look too big"?

About the last thing I want to do is look at your butt, wbl!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ping Rapture irons	Johnny Par	Equipment talk	5	07-26-2007 11:52 AM
Ping Rapture	SunnyDaze	Equipment talk	14	03-08-2007 12:49 PM
The Ping Rapture "Challenge"	warbirdlover	Equipment talk	44	02-14-2007 01:47 AM
Ping Rapture	JEFF4i	Equipment reviews	16	10-27-2006 02:33 AM
Boycott Ping	nsherman2006	Equipment talk	88	10-04-2006 11:35 PM