+ Reply to Thread
Results 1 to 13 of 13

Thread: Fairway wood usage

  1. Arrow Fairway wood usage

    Does anyone use fairway wood to get out of the medium rough when you are still quite some distance away from the hole? I find it difficult to use fairway wood in the rough, balloon hybrids, so my only choice remaining is 3 iron in order to get out of the rough and get as much distance as possible. Any advice on how I could get as much distance as possible but from a mid rough? Is it advisable to use a fairway from a rough?
    -------------------
    Driver: Ping G10 9º w/ Grafalloy Prolaunch Red Stiff
    Wood: Ping G10 15.5º w/ Grafalloy Prolaunch Red Stiff
    Wood: Ping G10 18.5º w/ Grafalloy Prolaunch Red Stiff
    Irons: Mizuno MP60 3-PW w/ Dynamic Gold Sensicore S300
    Wedge: Titleist Vokey 200 Series 52-08
    Wedge: Titleist Vokey Spin Milled 58-08
    Putter: Titleist Scotty Cameron Studio Style Newport 2

  2. I never use a wood to get out of the rough...
    Titleist x76 /Ogio Atlas
    Cobra Comp 454 10.5
    Cobra Comp FW 3 & 5
    Cobra Baffler 3/R dws
    Mizuno MX-23 5-P
    Cleveland 797 BeNi 52,56,60
    Scotty Cameron Newport 2 SS
    Titleist Pro V1

  3. Fairway woods always get caught up in the thick rough for me. I use the lowest lofted iron I think I can get out with. Usually 5-iron is the lowest loft I have any luck with. If the rough isn't thick I've hit a 3-wood or hybrid out of it okay.
    What's In the Bag
    Ping G10 9º w/ stiff Diamana BB
    Cobra F Speed LD 3-wood 15.5º w/ reg YS Tour AD
    Cobra Baffler DWS 20º & 23º w/ reg VS Proto HL
    Ping S59 3-PW w/ stiff Nippon PRO 950GH
    Titleist Vokey Spin Milled 56º wedge
    Scotty Cameron Circa 62 #3 35"
    Adidas Powerband shoes
    Ogio Atlas Golf Bag
    Titleist NXT extreme ball

    Location: southeastern Wisconsin
    Low 18: 78 (once)
    Low 18: 79 (five times)
    Low 9: 36 (twice)
    Hdcp: 15.5
    Aces: 1

  4. I'll hit my 3W if the ball is teed up on the blades. As for a hybrid, I find that my Md performs quite well out of the thick stuff. Just got to play it back a bit and hold on.

    Callaway FT-5 Tour 9.5* -- MR Diamana Blueboard 63
    Bridgestone J33 15*/J33U 18* -- AXIVCore Blue 79/NV Hybrid 85
    Adams Idea Pro 20*/23* - VS Proto Hybrid
    PING G10 (5); i10 (6-9,U) -- AWT
    PING iWedge 54*; Tour-W 58/06 -- AWT
    putter tbd


    San Jose, CA
    "The future is no place for your better days"

    RIP Bravo

  5. #5
    Quote Originally Posted by chemboy2 View Post
    As for a hybrid, I find that my Md performs quite well out of the thick stuff. Just got to play it back a bit and hold on.
    That's the key to hitting hybrids out of the rough - a very firm grip and I can muscle mine out of pretty much anything. The slightest bit of looseness in the grip and the grass can rip the club face round from your hands and cause slices, tops and the ballooning you talk about.
    "My baby got the Yips, my baby got the Yips
    She goes out in 32, but comes home in 54
    Well I told her to see the Club Pro, But she said 'n-n-n-n-n-no'
    Have you tried the overlap grips? Yeah - but still she got the Yips..."

  6. I can't hit the damn things anywhere. They're the Devil's tools.:real angry:
    It must be awful to have to work for a living.

  7. #7
    Didnt Lefty try that last year at the US Open, fw wood out of the rough? He only moved the ball about 3in :real angry:

    Nope no FW wood out of the rough for me....
    Blew up the bag, not sure what's going in next...
    Any suggestions?


  8. #8
    A fairway wood will cut through the rough better than an iron for me.With an iron,the grass can get tangled around the head,this is the traditional view anyway.Just choke down and punch it out

  9. Who needs a FW wood? I popped one up into the rough about 20yds. with my driver today... Like the famous photo. :laugh: I got so pissed off I hit my driver again out of the rough approximately 230yds. up the fairway with a little cut. lol. And this was not sitting up either, I was amazed I caught it that well. I was just so mad I didn't care.

    I normally will pretty much play any club from a decent lie or in weak rough. The thick stuff? If it's down forget it. Pro's can't even hit out of that crap, I use a SW and make sure it's out.

    TourEdge CB1 13* CompNT 85-S
    Titleist 906F4 18.5* Speeder761
    RescueMid TP 22* S300
    Titleist 704CB 4i-PW S300
    Vokey 50-08
    Titleist Proto 55*
    Vokey SM 60*
    Wilson KCII
    Ogio Vaporlite Stand bag

    Cap - 9.8
    Location - Providence, RI

  10. #10
    If it's relatively short rough, like I see most of the places I've played I'll use the fairway wood. This MP001 I got from VTdivot fires missiles, man.

    If the rough is longer I'll use my hybrid and it seems to work pretty well. Real long I go with 7 iron or higher and just try to knock it on the fairway with a little distance on it. Like Ezra said, I just try to make sure it gets out of there and play on.
    In the bag:

    Cleveland Hi-Bore, 9.5*, Aldila NV Stiff
    TaylorMade R5 XL, 4-9 Irons, reg. steel
    Mizzuno MP.001 3W, Aldila NV
    Nickent 3DX DC Hybrid 4/23*, stiff
    T.P. Mills Tour Series 15 (circa mid-70's)
    Adams 'Tom Watson' SW56-13, GW 52*, LW 60*
    Ogio Nitrous
    Callaway Warbird

  11. #11
    Depends on how far down it is, my likely hood of making the green on a good shot, and how bad I need one less stroke.

    More often than not I take my 3 iron.
    Callaway FT-i Tour Neutral 8.5* Accuflex Creation 65-X
    Nike Sumo 2 9.5* UST Proforce V2 76g-S
    r7 460 8.5* Grafalloy NT Prototype 65 X-Stiff
    Tour Edge Exotics 18* Accuflex Evolution Stiff
    Titleist 975F 16.5* V2 85 X-Stiff
    Wilson Staff Hb5 17* Hybrid Rifle Flighted X-Stiff
    Titleist DCI 990s True Temper Stiff
    RAC TP True Temper 52*
    RAC TP 56* True Temper
    Scotty Cameron Studio Design #1
    Location: New Mexico

  12. I have found that if I try to hit my hybrids like I was trying to hit a punch shot out of medium ruugh, it gets up nice; but keeps a low flight. About like a 3 iron off the fairway.
    TM R7 10.5* NVS R75 shaft
    CB1 NV65R 18*
    Nickent 3DX hybrids 21.5* and 26* NV75-R
    Nike CPR irons 5(27*)-PW(48*) steel
    Nike SV 52/10, 56/14 w60/8 wedges
    SeeMore Original Mallet
    Nike Powersoft Balls
    Location: Portland Oregon

  13. Quote Originally Posted by Sean View Post
    This MP001 I got from VTdivot fires missiles, man.
    Great, both you and Jules are killing the 3W's I sold you, while my search continues.

    That thing was a cannon for me off the tee, but I couldn't hit it from the fairway. Sounds to me like it's probably user error
    Callaway FT-i Tour LCG 9.5 Speeder 686 S
    Cleveland Launcher Steel 15* NVS 75 S
    Bridgestone J33U 21* Aldila NV 85H S
    Mizuno MP-60 4-W DGSL S300
    Cleveland 588 RTG 51*
    Titleist Vokey SM 54*
    Titleist Vokey SM 58*
    Slighter Custom Bellevue Prototype
    Titleist ProV1

+ Reply to Thread

Similar Threads

  1. Driver swing vs fairway wood swing
    By SiberianDVM in forum Hacker's Anonymous
    Replies: 16
    Last Post: 10-05-2007, 09:43 AM
  2. switching from 3iron to hybrid to fairway wood?
    By RickinMA in forum Equipment talk
    Replies: 5
    Last Post: 09-20-2007, 07:19 AM
  3. Need fairway wood shaft advice
    By SiberianDVM in forum Equipment talk
    Replies: 17
    Last Post: 04-20-2007, 07:21 AM
  4. Hybrid shaft on fairway wood?
    By hypergolf in forum Equipment talk
    Replies: 1
    Last Post: 03-06-2007, 06:51 PM
  5. Fairway wood options
    By BlakeDgreat in forum Equipment talk
    Replies: 20
    Last Post: 02-21-2007, 09:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts