Putting the Paintfill back and Reshaft

[footballking732]

i just won an r7 tp 15* 3w on ebay for a steal... $52 plus ship steal..

the only problem is that it has the painfill half removed.. how would i go about putting the paintfill back in, as close to to same colors as possible??

im going to have to get the shaft switched out anyways, it has a R300 in it... which will be definately no match for me.. i hate steel shafted woods anyways..

which leads me to my 2nd question, i have a 3 wood length Graffalloy Blue Stiff inside a Callaway Warbird 3w...

i would like to switch it over to the r7 tp, but the Warbird is bore-thru, and the r7 tp is not.. will it work?? if it will, what exactly should i tell the clubmaker to do??

[Rockford35]

I'm assuming the Tp is a 3W?

R35

[footballking732]

Originally Posted by Rockford35

I'm assuming the Tp is a 3W?

R35

yes...

i also managed to pick up a titty 585h 19* with Aldila NV 85 S.. but another thread to come later..

[BStone]

I'm pretty sure that the Warbird is a .350" tip, and I know the r7 TP is a .335" tip, so they would not match up well.

[footballking732]

Originally Posted by tmag

I'm pretty sure that the Warbird is a .350" tip, and I know the r7 TP is a .335" tip, so they would not match up well.

welll i did a quick google search, and according to golfunit.com, different year warbirds are different tip sizes...

i just checked, and my model has a s2h2 in fancy lettering.. it also says Big Bertha Warbird.. any clue as to exactly what model it is?

[footballking732]

i.e

S2h2 fairway wood 1989 .335

Big bertha warbird fairway wood 1994 .335

im starting to think that its .335... because these are the only ones that i found on the site that seem close in description to mine..

[Rockford35]

If it has Warbird written on it, it's a .335. I've reshafted more than a few.

R35

[Eracer]

Originally Posted by footballking732

i just won an r7 tp 15* 3w on ebay for a steal

Originally Posted by Rockford35

I'm assuming the Tp is a 3W?

R35

My gawd you are DENSE...

[GUITARNUTTERUK]

any paint will do but if you can get a small amount of automotive paint, it will last longer. as long as the area to put the lettering is okay in ragards to scrathes and damage them just apply it all over the lettering and just use a soft tight cloth to wipe of excess paint, jobs a gud un!

[footballking732]

Originally Posted by Rockford35

If it has Warbird written on it, it's a .335. I've reshafted more than a few.

R35

yes, it does have warbird written on it..

thanks!! this is exactly the thing i wanted to hear..

[footballking732]

Originally Posted by Eracer

My gawd you are DENSE...

i edited my post for clarification right after rock asked that question..

lol, you are dense now..

[Clugnut]

Clean it up completely. They look hot naked.

[WildCatGolfer17]

hey football, if you are getting rid of that R7 tp I really need a nice 3w and that suits awesome.. I would give you more than $56... if you can hook me up pm me

[footballking732]

Originally Posted by WildCatGolfer17

hey football, if you are getting rid of that R7 tp I really need a nice 3w and that suits awesome.. I would give you more than $56... if you can hook me up pm me

ill let you know if i end up hating it.. i have a 2 cap friend who said it felt terrible, so ya never know.

its my experiment club... im going to be throwing some shafts in there so i can get a good combo.

and i paid 64.99, so after the re-shaft(installation, and the shaft cost) and the paintfill time, it will be alot more than 64.99...

[footballking732]

Originally Posted by Clugnut

Clean it up completely. They look hot naked.

coming from the guy who just spent a long time refilling the SQuad paintfill??

and imo, they look ugly naked...