Iron Shafts? - Shot Talk

**Sandpiper3** · iTrader: (0) #1 (**permalink**) 10-19-2007, 06:32 PM

Which shafts should I throw into my j33bs? I kinda knew that the x100s were guna be wayyyy too much shaft for me, but my ego wanted a shot. Now that my ego has been tamed

I hit the x100s so low that i think I killed a few worms out there. Like so low that nothing longer than a 7i could hold a green (see my review thread for descrip. of my round).

Looking for something MUCH softer and much higher launch. Would the Rifle 6.0s I have in the closet be a good try? Should I just go back to S300s? Should I try a diff shaft?

Opinions by and large please, I have everything I need and the knowledge now to pull/reinstall shafts, so it shall be done. Most likely pulling the x100s by the end of the weekend to fund new shafts. Anyone interested in 3-pw x100s 1/2" over let me know. I did two pulls today and they were perfect

, so they'll be in good shape when they leave.

**ezra76** · iTrader: (4) #2 (**permalink**) 10-19-2007, 06:35 PM

Sissy.

I just saw a set of TC3's for sale. What's your tip?

**Sandpiper3** · iTrader: (0) #3 (**permalink**) 10-19-2007, 06:37 PM

.355 I believe.

Lil_Huth · iTrader: (0) #4 (**permalink**) 10-19-2007, 07:31 PM

Pfffffff, Sand dont be a baby. Go and get your self some real shafts, 7.5 Project Xs baby. Only way to go.

**Sandpiper3** · iTrader: (0) #5 (**permalink**) 10-19-2007, 07:33 PM

I'll also mention, my misses, everything was either thin, blocked, or block fade, to even one or two slices (cut going about 10-15 yards over, the slice had to have done at least 50 yards off the centre line of the fw I was aiming down).

Lil_Huth · iTrader: (0) #6 (**permalink**) 10-19-2007, 07:37 PM

Hmmmm, maybe it's not the shafts.........

big_greasy_taco · iTrader: (0) #7 (**permalink**) 10-19-2007, 08:49 PM

Quote:

Originally Posted by Lil_Huth

Pfffffff, Sand dont be a baby. Go and get your self some real shafts, 7.5 Project Xs baby. Only way to go.

I dunno, those might still have too much flex!

Aces-5 · iTrader: (0) #8 (**permalink**) 10-19-2007, 08:54 PM

I have really been impressed with Project X 5.5s in my R7 TPs. So much so that my TP MBs are with my clubmaker right now being fitted with PX 5.5s. Nice trajectory and tighter pattern than DG S300 for me.

**RickinMA** · iTrader: (0) #9 (**permalink**) 10-19-2007, 08:57 PM

are the 6.0's in the closet Flighted or regular Rifles?

don't be afraid of the Dynalites!

**Sandpiper3** · iTrader: (0) #10 (**permalink**) 10-19-2007, 09:02 PM

I couldn't handle dynalites, i have to have weight in my club. They'd be too light.

I have no clue if theyre flighted or regular? Its got a gold sticker saying FCM Rifle 6.0.

Im guna take a look at Rifle 5.5s or maybe even project Xs if the price tag allows. I've been told 6.0 plays a little stiffer than s300s and 5.5s are just below the stiffness of s300s. (for comparisons sake).

**Clugnut** · iTrader: (3) #11 (**permalink**) 10-19-2007, 09:37 PM

If your not afraid to drill the blades, I'll have a set of Project X 6.0 in about a week. .370 tip.

**ezra76** · iTrader: (4) #12 (**permalink**) 10-19-2007, 09:44 PM

I don't know about 6.0's. Twofast put X100's in his Nike's and they actually feel better to me than 6.0's. I'd think about looking into stuff like BG, TC3's or NS1150's.

**Sandpiper3** · iTrader: (0) #13 (**permalink**) 10-19-2007, 09:56 PM

Definately not drilling them

.

Ez, find me somethin to ho man!

**ezra76** · iTrader: (4) #14 (**permalink**) 10-19-2007, 10:05 PM

What do you have in the TM's? Swap 'em.

**Clugnut** · iTrader: (3) #15 (**permalink**) 10-19-2007, 10:10 PM

TRUE TEMPER TOUR CONCEPT S3 3-PW IRON SHAFTS .355 TAPER - (eBay item 190164151078 end time Oct-28-07 19:30:00 PDT)

Done and done.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What are the Best STEEL IRON SHAFTS!!??	WildCatGolfer17	Equipment talk	9	09-27-2007 09:23 PM
Iron Shafts....	TaylorMade89	Equipment talk	12	07-17-2007 08:23 AM
Accra iron shafts....any info/experiences?	Rockford35	Equipment talk	0	05-30-2007 12:13 AM
FST Vision Iron Shafts	ualtim	Equipment talk	0	02-04-2007 11:04 AM
Which Rifle iron shafts?	Eracer	Equipment talk	3	02-06-2006 08:22 AM