Alright Mine is here, I joined the club

[WildCatGolfer17]

TEE CB1 3w 15*
UST v2 66g 43.5 inches i think. Stiff flex.

even though ive hit more balls in the last 2 days than I have in prob forever, i think im going to go give it a whirl.

The only thing that worries me is the V2 tip feels VERY soft.

[Rockford35]

So pull the head and tip it an inch. 43" is fine for a 3W.

R35

[WildCatGolfer17]

I dont know how.... Im going to take it to the range first, and if its giving hooks then Ill have them measure and tip.

[Rockford35]

Or, get a heavier shaft in there. 66g is awfully light for a FW shaft..

R35

[ezra76]

CompNT 85S tipped, the bomb. I know you'll like the head. The thing has some juice, easy to hit and workable. It's worth it to get a shaft you like in it because believe me, you won't be looking to change it out for a long time.

[MIKE1218]

Not to thread jack, but what is the difference between the CB1 and CB2? Face height, shape, anything?

[Rockford35]

Originally Posted by MIKE1218

Not to thread jack, but what is the difference between the CB1 and CB2? Face height, shape, anything?

They're virtually the same asthetically. The CB2 might be tad longer from front to back, but very little if any.

Internally, a deeper CG in the CB2 and a lighter face, which makes it supposedly more forgiving/the MOI deal.

They promise 20 more yards with the CB2. I have no idea how that is possible after hitting the CB1. No clue.

R35

[Wi-Golfer]

Originally Posted by Rockford35

Or, get a heavier shaft in there. 66g is awfully light for a FW shaft..

R35

The stock shaft in my burner 3 w is 50 grams. Not sure about the 4w, it's a YS-6+ S350. Surely the 350 can't refer to 35 grams so i don't know what it is.

[Rockford35]

Originally Posted by Wi-Golfer

The stock shaft in my burner 3 w is 50 grams. Not sure about the 4w, it's a YS-6+ S350. Surely the 350 can't refer to 35 grams so i don't know what it is.

That must be a tough club to control. Long, but tougher to hit straight on the button, even at D4.

R35

[Wi-Golfer]

Originally Posted by Rockford35

That must be a tough club to control. Long, but tougher to hit straight on the button, even at D4.

R35

Not with my slow assed swing speed.

[Rockford35]

Originally Posted by Wi-Golfer

Not with my slow assed swing speed.

Gotcha.

R35

[WildCatGolfer17]

Well i gave t a go at the driving range, this thing is an absolute cannon, but as I suspected I am getting a tad pull draw on miss hits, but if I just smooth it its fine. But I saw this shaft i REALLY want, so im going to see if I can sell some stuff. its a Matrix OZIK LIMEY!

[MGP]

Originally Posted by Wi-Golfer

The stock shaft in my burner 3 w is 50 grams. Not sure about the 4w, it's a YS-6+ S350. Surely the 350 can't refer to 35 grams so i don't know what it is.

The YS-6+ S350 is 66 grams. The S350 part means it's a stiff flex with a .350 tip.

[Wi-Golfer]

Originally Posted by MGP

The YS-6+ S350 is 66 grams. The S350 part means it's a stiff flex with a .350 tip.

Thanks, didn't even think about tip size.