Recommend me a Shaft - Shot Talk

**King Par** · iTrader: (0) #1 (**permalink**) 06-03-2008, 04:47 PM

I'm playing the UL 440 right now, at 46".

It's too light and I hate the way it feels. It just doesn't feel good to me, can't explain it. I was originally going to go to a different head, but I've hit this on the screws a few times and it feels really good and performs. So a heavier/shorter shaft should work.

I'm choking up on it consistently, and measured where I hit it best and that's two inches from the top. So I'm going to play my next driver at 44".

I need a recommendation for a shaft. I also like a boardy feeling shaft, just a personal preference.

-Low/Mid Launch
-75-100 grams
-Stiff

I've been thinking UST Proforce V.2 75 or Graman UL 680.

I know I'm overlooking a lot of shafts, any help is appreciated.

Thanks

**Clugnut** · iTrader: (3) #2 (**permalink**) 06-03-2008, 04:50 PM

Fujikura Pro95. Best heavy shaft out there, IMO.

dave. · iTrader: (0) #3 (**permalink**) 06-03-2008, 04:54 PM

I've hit that, but its tip stiff, the Harrison Pro 2.5 95g is a little easier. You could always try steel at 44"

**RickinMA** · iTrader: (0) #4 (**permalink**) 06-03-2008, 05:01 PM

how about looking for a closeout on one of these
Dynamic Gold Lite

trimmed I'm guessing will get you pretty close to 100grams

or, maybe one of those pink NV's you see on Ebay for $20? - a pink shafted geek would be pretty badass

**warbirdlover** · iTrader: (0) #5 (**permalink**) 06-03-2008, 05:11 PM

The good old Graf Blue (not ProLaunch Blue) is about as boardy as it gets.

Not sure what weight you can get that in.

dave's Harrison suggestion.

Accuflex Evolution.

Rockford35 · iTrader: (5) #6 (**permalink**) 06-03-2008, 05:44 PM

UL780. Just do it and forget about it.

When I had a UL680 in a driver head, it was so soft I couldn't tip it enough to give it a chance at 250cpm. One of the worst shafts I have ever swung.

NV-esque.

R35

**LyleG** · iTrader: (1) #7 (**permalink**) 06-03-2008, 05:46 PM

Quote:

Originally Posted by Rockford35

UL780. Just do it and forget about it.

R35

Great shaft for sure, one I would recommend without question.

The Fuji speeder 757 is always a good bet as well.

Rockford35 · iTrader: (5) #8 (**permalink**) 06-03-2008, 05:47 PM

Quote:

Originally Posted by LyleG

Great shaft for sure, one I would recommend without question.

The Fuji speeder 757 is always a good bet as well.

Yep, the 757 is a solid choice too.

R35

**ezra76** · iTrader: (4) #9 (**permalink**) 06-03-2008, 05:51 PM

If you like the 757, you should also have luck with the CompNT and the VS Proto. Pick your weight. 3 of my favorite shafts.

Rockford35 · iTrader: (5) #10 (**permalink**) 06-03-2008, 05:53 PM

If i was to go non-Creation, I'd pick these, in order:

VS Proto 60S
UL780 250
Comp NT 65S

R35

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.shottalk.com/forum/equipment-talk/19580-recommend-me-shaft.html
Posted By	For	Type	Date
Shot Talk - Golf Forum - Powered by vBulletin	This thread	Refback	06-03-2008 04:53 PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UST Freqency Filtered Putter Shaft	ualtim	Equipment talk	11	02-13-2008 09:47 PM
Newest Driver Technology	warbirdlover	Equipment talk	33	08-23-2007 10:13 AM
Recommend me a shaft and specs	dave.	Equipment talk	14	04-17-2007 07:25 AM
How hard is it to reshaft clubs?	DrBrown	Equipment talk	20	04-20-2006 01:43 AM
Loop's Club Assembly Guide for the Amateur	Loop	Shot Talk	5	02-01-2005 12:50 PM