+ Reply to Thread
Results 1 to 8 of 8

Thread: Lead Tape

  1. Lead Tape

    I am debating on experimenting with lead tape on my 3wood. Questions I have are will it come back off easily enough? Where should I put it? My big problems with the 3wood, this one and every other I've tried, are skying it off the tee and wormburners off the fairway. I have the weight system in my R7, if this is any indication, set for a high launch. I still hit very low trajectory drives. I get better loft with my higher irons. The 3wood is a TM200 Steel with a steel stiff shaft.

    TourEdge CB1 13* CompNT 85-S
    Titleist 906F4 18.5* Speeder761
    RescueMid TP 22* S300
    Titleist 704CB 4i-PW S300
    Vokey 50-08
    Titleist Proto 55*
    Vokey SM 60*
    Wilson KCII
    Ogio Vaporlite Stand bag

    Cap - 9.8
    Location - Providence, RI

  2. yeah, you can get it back off. I'd put it back and low if i were you. I just cut down, regripped, and added lead tape to a Snake Eyes 600T 3 wood, it's in the bag next time i play. Actually, i really cheaped out on it too, and used lead tape i had already taken off my Steelhead Plus after i realized i put too much on. That's right, i reused lead tape
    Cleveland Launcher 460
    TaylorMade V-Steel
    Cleveland Tour Issue TA! 2, 4-PW
    Cleveland 900 52, 56
    Titleist Special Grind 60-V
    Scotty Cameron Newport Pro Platinum

  3. So put it on the sole of the club? How are you cutting down the shafts? From the grip end right? I may take a little off the 3w too. My goal is to have a club I can hit rather than the 5w. I can smoke that 5w though. As you've seen firsthand, my driver inconsistancy really hurts on bad days.

    TourEdge CB1 13* CompNT 85-S
    Titleist 906F4 18.5* Speeder761
    RescueMid TP 22* S300
    Titleist 704CB 4i-PW S300
    Vokey 50-08
    Titleist Proto 55*
    Vokey SM 60*
    Wilson KCII
    Ogio Vaporlite Stand bag

    Cap - 9.8
    Location - Providence, RI

  4. Yeah, just ripoff the grip, cut the shaft, and regrip. I only did it to cut it down to normal 3 wood length, as it was an inch or two overlength
    Cleveland Launcher 460
    TaylorMade V-Steel
    Cleveland Tour Issue TA! 2, 4-PW
    Cleveland 900 52, 56
    Titleist Special Grind 60-V
    Scotty Cameron Newport Pro Platinum

  5. I may do it. I liked the way your driver felt with the shorter shaft, much more controllable. I'll try gripping down first before I break out the sawsall. I need more $$. There are like $600 worth of clubs I want on Ebay right now.

    TourEdge CB1 13* CompNT 85-S
    Titleist 906F4 18.5* Speeder761
    RescueMid TP 22* S300
    Titleist 704CB 4i-PW S300
    Vokey 50-08
    Titleist Proto 55*
    Vokey SM 60*
    Wilson KCII
    Ogio Vaporlite Stand bag

    Cap - 9.8
    Location - Providence, RI

  6. #6
    This may be of use, I don't personally use lead tape except with my putter, but I found this when trying to better understand the characteristics.
    http://www.golfspan.com/features/features_lead.asp

  7. I've got a couple of strips of lead tape on the back of my Hogan 5iron & 8iron, in order to get the swingweight to D2, along with the rest of my clubs, excluding the SW & LW. All of the irons are Hogan CFTs, but the 5 & 8 measured (and felt) way light at D0. Ben Hogan would be disappointed at the quality control of these clubs.
    TaylorMade Tour Burner TP 10.5° Penley Stealth "JD"
    Tour Edge Exotics 15° Penley Stealth "JD"
    Nickent 3DX Ironwood DC 17° & 20° UST Proforce V2
    Hogan Forged Radial 3-SW
    Never Compromise VooDoo

    Augusta, GA

    Do you know the difference between a BMW and a porcupine? The porcupine has its' pricks on the outside.

  8. #8
    Lead tape will do nothing for the problems you describe,you need a lesson and some practice time

+ Reply to Thread

Similar Threads

  1. Lead Tape
    By gunning4u in forum Equipment talk
    Replies: 3
    Last Post: 08-03-2007, 07:16 AM
  2. Lead tape on Driver questions, HELP!!!
    By kwcsports in forum Equipment talk
    Replies: 20
    Last Post: 02-02-2007, 11:02 AM
  3. Lead Tape
    By emc in forum Equipment talk
    Replies: 3
    Last Post: 10-04-2006, 02:18 PM
  4. Lead Tape...questions and myths answered
    By Rockford35 in forum Shot Talk
    Replies: 28
    Last Post: 09-11-2006, 08:50 AM
  5. Replies: 12
    Last Post: 09-09-2006, 06:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts