Re: been a while got a new toy to go golfing

Originally Posted by
MCDavis
Got them on yet?
Or more to the point - got the old ones off yet? 
jdub, I'll save you some trouble (just in case you don't already know.) The stud end of the stock end links is a tapered seat into the swaybar. It can be a real pain to get loose, but it's very easy if you know the magic trick.
Take both end links loose from the axle end. Now swing the swaybar down and around as far as you can - it'll rotate all the way around until it's touching the bottom of the front bumper and the ends of it are sticking out the front of the jeep. Take the nuts loose on the end links. Now whack the stud with a hammer. One or two hits and the endlink will shoot right out. It will quite literally shoot out, by the way - make sure nothing is in the path, because it'll knock the crap out of it. This is a helluva lot easier than trying to seperate them with a pickle fork or trying to knock them out with the swaybar rotated in its normal position.
Maltby CT250 12° - V2 75 S
Nickent 4DX 3W - Graman M65 R
Nickent 4DX IW 20°, 23° - Graman M75 R
Nickent 4DX CB 5-PW - TT ST-90
Maltby M Milled 52°,56°,60° - FST 115
Maltby MSP 02
Bookmarks