Drills For Cutting Across the Ball - Shot Talk

APowell1990 · iTrader: (0) #1 (**permalink**) 05-25-2006, 12:44 PM

I have not been able to get the ball to the hole the past few rounds and I have noticed I am cutting across the ball very bad. I was wondering about things I could do to get out of cutting across the ball.

APowell1990 · iTrader: (0) #2 (**permalink**) 05-25-2006, 12:48 PM

Also another reason why I cant stick to cutting across the ball is that the greens I play at are slow.

Loop · iTrader: (0) #3 (**permalink**) 05-25-2006, 06:06 PM

You need a drill to slice the ball?

APowell1990 · iTrader: (0) #4 (**permalink**) 05-25-2006, 08:02 PM

o should say "Drills For NOT Cutting Across the Ball.

**ezra76** · iTrader: (4) #5 (**permalink**) 05-25-2006, 08:30 PM

I like to warm up by laying an iron down facing straight and practice swinging 2-3 inches in front of it. I have been much better after warming up like this.

APowell1990 · iTrader: (0) #6 (**permalink**) 05-25-2006, 08:41 PM

okay I messed around today and putted a little better, but distance wise I am horrible. When I overcompensate to get the ball to the hole I cutt across it horribly. I have never had any problems putting on the slow greens before though. I will try that out tommorow.

GregInOz · iTrader: (0) #7 (**permalink**) 05-25-2006, 10:12 PM

If it's putting where you're cutting across the ball, there's an easy drill to get your path back on track. Even guys like Tiger use it.

Go to the practice green with two tees, and some balls obviously. Pick out a slightly uphill, 4-5 foot put with no break. Put your putter in the address position, squared to the hole and place one tee 1/4" outside the heel of the putter, one 1/4" outside the toe. Place the ball smack dab in the middle of the two and practice your putting "swinging through the gate". If your path is a little off you'll bang into the tees. Groove this until nothing else feels natural.

**ezra76** · iTrader: (4) #8 (**permalink**) 05-25-2006, 10:15 PM

What I mentioned is a swing path drill. When I cut across my divots are going left and my ball is going left to right slicing . If I were to swing out to in like that I would hit the shaft of the iron I lay down.

dave. · iTrader: (0) #9 (**permalink**) 05-26-2006, 01:36 AM

the answer will probably be in the set-up

Adam Pettman · iTrader: (0) #10 (**permalink**) 05-26-2006, 07:17 AM

Just remember PILS (pure in line stroke)put simply the putter goes straight back, the putter goes straight through no variables, not much to go wrong. the further the ball needs to go the longer the stroke.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tee Shot Blues! Hooks, trouble getting it up!.	halifax_golfer	Shot Talk	10	08-18-2006 06:51 PM
Any Drills For How To Draw The Ball	esson_rfc	Shot Talk	17	08-04-2006 04:49 PM
Which loft would you recommend for me?	Roy	Equipment talk	22	10-26-2005 06:12 AM
Four Keys to Hitting a 460cc Driver	InnovexGolf	Equipment talk	9	10-24-2005 02:37 PM
Hey, anyone wanna help me out?	Youngun5	Shot Talk	4	02-24-2005 09:56 AM