ezra76
Well-Known Member
- Feb 5, 2006
- 12,412
- 16
Finishing up the Superquad, hopefully. Still have to do something with the ferrule as Rock had said in the other thread. OK, so what's the length of this club right now? The end of the tape is exactly on the end of the grip in these photos. I had done a pre-measure, cut and grip install to get it to 45". There is like 45 1/4" to the heel but looks like around just over 46 to the very bottom of the sole, the longest possible measurement.
Do I need to re-cut this thing to get to 45"? How much effect would gripping down a little have? I have the V-55 on it and if I were to use the grip position on that grip it would be like about an inch choked down anyway.
I'd also like to get this to around the same swingweight as my FW woods. I set those up to TM's factory headweight for a D2 and at 42.5"-85g in the 5w and 73g-43" in the 3W. They should be at a D2 with those specs and to me feel very much the same as my irons, which are at D2 according to Miura's specs.
Do I need to re-cut this thing to get to 45"? How much effect would gripping down a little have? I have the V-55 on it and if I were to use the grip position on that grip it would be like about an inch choked down anyway.
I'd also like to get this to around the same swingweight as my FW woods. I set those up to TM's factory headweight for a D2 and at 42.5"-85g in the 5w and 73g-43" in the 3W. They should be at a D2 with those specs and to me feel very much the same as my irons, which are at D2 according to Miura's specs.