My Clubs

[cyberious]

My clubs, the third one shows the clubs I alternate with depending upon conditions. Standard configuration is:

Cobra 454 Comp 7.5 degrees
Taylor Made V Steel T/S
Taylor Made R5 5 wood
King Cobra II 1 iron
King Cobra SS Forged 4-PW
Cobra Trusty Rusty 53 and 57 degree wedges
Odyssey 2 Ball blade
King Cobra Staff Bag

Alternates:
Cobra 454 Comp 10.5 degrees (wet conditions)
Cobra 414 Comp Tour 8.5 degrees (winter or tight course)
Cobra Baffler 2/R
Cobra SS Forged 2 and 3 iron
Cobra Melbourne II Putter

 

[longiron]

LOve the vsteel but left the r5 in the shop just didnt like the feel. Nice set either way.

 

[Youngun5]

hey, what shaft do you have in your V-steel and how do you like it?

 

[cyberious]

Just the standard TM Stiff shaft. Seems to be OK. I've only played it a little. If it doesn't work out I'd probably put an Aldilia NV in it.

 

[Benguk]

post another pic of the cobra putter


I still cant get over the fact that you have 3 of the same drivers with only 1 or 2* of loft difference

 

[nsherman2006]

how do you like the ss forged irons? Just ho'ed a set of them and am wondering what to expect. What handicap do you play off of? Sweet sticks man

 

[cyberious]

how do you like the ss forged irons? Just ho'ed a set of them and am wondering what to expect. What handicap do you play off of? Sweet sticks man

I like the SS Forged they are a good set of sticks (I don't notice any difference between them and the CB Forged). Workability and they look great. I do have to admit though that if Cobra came out with a set of Forged Blades I'd be all over them. I had to get fixed up by my chiropractor last week as my back has been bothering me causing my swing to suffer so my current handicap is 1.4 before that however it was 0.

 

[cyberious]

hey, what shaft do you have in your V-steel and how do you like it?

BTW, I played a round with the standard shaft in the VSteel and have decided it is junk. I'll be pulling it soon and putting a better one in.

 

[cyberious]

post another pic of the cobra putter


I still cant get over the fact that you have 3 of the same drivers with only 1 or 2* of loft difference

Actually the Cobra putter is the Melbourne II model. Should be lots of pics around for that one.

Well one of the drivers is a 414 Comp Tour slightly smaller and has more workability. The 10.5 I don't use as much anymore although during the rainly season I do use it some. The wife has taken a liking to it so I don't imagine I'll get to use it much anymore. The 7.5 allows me to hit really long drives especially since I get another 30-40 yards of roll out of a solid hit. I use it most of the time but it is pretty much a tee it high and let it fly club. The 414 Comp Tour is 8.5 and gives me a little higher flight and works well when I really need to control the ball on tight courses.

Golfsmith really loves to see me coming when I decide to buy a new driver since I buy 3.

 

[Wheelerm]

Are they steel shafts or graphite shafts?, i have a set of graphites but not cobra's

 

[cyberious]

All the woods are graphite and the irons are steel.

 

[Youngun5]

BTW, I played a round with the standard shaft in the VSteel and have decided it is junk. I'll be pulling it soon and putting a better one in.

did you ever get around to switching it? if so, what'd you put in.
mine's in the shop being reshafted as we speak

 

[cyberious]

did you ever get around to switching it? if so, what'd you put in.
mine's in the shop being reshafted as we speak

For grins I put a Grafalloy Pro Launch 55S in it. Gives it a little higher launch.