Typical St'ers WITB

[FKA19]

Okay... I have a new idea.
Everybody give their interpretation of the typical Shot Talk WITB, based on the products that are most liked by the members..
I'll start:

Driver: Taylormade Burner TP 10.5* w/ Accuflex Creation 65S or BB Solutions 130
3Wood: Tour Edge Exotics CB2 15* w/ ?
Hybrids: Cobra Baffler Pro 20, 23* w/ Nippons
Irons: Mizuno MP60 5-PW w/ S300 or Nippons
Wedges: Titleist Vokey SM 52,58* w/ ?
Putter: Scotty Cameron Studio Style 2.5

 

[Youngun5]

great thread idea.

Maltby CT250 with BB Solutions 130
TEE CB1 15* with Accuflex Evolution
Nickent 3dx DC Ironwood 20* with UST V2
Mizuno MP-60 4-PW with Rifle 5.5's
Vokey Spin Milled 52, 56, 60
Odyssey 2-Ball white hot

 

[Pa Jayhawk]

Okay... I have a new idea.
Everybody give their interpretation of the typical Shot Talk WITB, based on the products that are most liked by the members..
I'll start:

Driver: Taylormade Burner TP 10.5* w/ Accuflex Creation 65S or BB Solutions 130
3Wood: Tour Edge Exotics CB2 15* w/ ?
Hybrids: Cobra Baffler Pro 20, 23* w/ Nippons
Irons: Mizuno MP60 5-PW w/ S300 or Nippons
Wedges: Titleist Vokey SM 52,58* w/ ?
Putter: Scotty Cameron Studio Style 2.5

Damn, this is a confidence booster. Pretty darn close to my current bag if you mix up the shafts. While I wont go back to a TM driver, I would have the Vokey's if they were a little heavier, and the SC Putter if it came with a soft insert.

I guess my picks would be pretty close with exception to the driver. From what I have seen on here, I may have to go with the Geek. Although I would also likely say the CB1's over the CB2's.

 

[Topflite_D2]

I'm not up to par today what does WITB mean? Wanted It to buy?

 

[MIKE1218]

whats in the bag

 

[Topflite_D2]

Oh in that case I'll chime in.
Driver-TM Burner 10.5 Graf. Epic
Woods-TEE CB2 5 wood Graf. Prolaunch Blue
Hybrids- Bobby Jones 2,3 Aldila
Irons- Titleist AP2 Project X 5.5
Wedges- Cleveland CG 14 Black Pearl 56° and 60°
Putter- Titleist Scotty Cameron 1.5 UST shaft

 

[warbirdlover]

Driver: Ping G10 with OEM shaft
3-wood: Ping G10 with OEM shaft
3 & 5 hybrids: Ping G10 with OEM shafts
irons: Ping G10 3-9
Wedge: Vokey SM 56º & 60º
Putter: Ping Redwood Anser

 

[Chefjohn]

drivers
titleist 905s no shaft yet
mp1 fujikura 757

Woods
titleist f2 18 deg steel shaft

Irons
mp 32 3-wedge
titleist vokey 52, 56
titleist elk 61
scotty pro platinum 350g

 

[Wi-Golfer]

Okay... I have a new idea.
Everybody give their interpretation of the typical Shot Talk WITB, based on the products that are most liked by the members..

I started posting & by the time I was finished typing, 8 members had ho'd new clubs from GG so I had to start over from scratch.

 

[RickinMA]

Driver: Taylormade Burner TP 10.5* w/ Accuflex Creation 65S or BB Solutions 130
3Wood: Tour Edge Exotics CB2 15* w/ ?
Hybrids: Cobra Baffler Pro 20, 23* w/ Nippons
Irons: Mizuno MP60 5-PW w/ S300 or Nippons
Wedges: Titleist Vokey SM 52,58* w/ ?
Putter: Scotty Cameron Studio Style 2.5

Maltby CT250 with BB Solutions 130
TEE CB1 15* with Accuflex Evolution
Nickent 3dx DC Ironwood 20* with UST V2
Mizuno MP-60 4-PW with Rifle 5.5's
Vokey Spin Milled 52, 56, 60
Odyssey 2-Ball white hot

Although I would also likely say the CB1's over the CB2's.

I think you guys are right on - typical shottalker's bag would be:
Driver: TM Burner TP w/ Creation AND a CT250 w/ Solution (remember most here own several)
FW: TEE CB1 - shafts are bit all over the place but the Evo or NV probably have it
Hybrid: Nickent 3dx was popular for a while for the guys not playing the Bafflers
Irons- MP-60's with DG with backup sets of Hogans and possibly a set of Pings and a set of golfsmith P2s
Wedges - Vokeys
putter- various Anser clones
bag - something ogio

the scary part is how many guys have equipment that was purchased from Lyle or Rory, went through Regina, or made a stop in Providence (where it may or may not have picked up a skymark )

 

[ualtim]

I think you guys are right on - typical shottalker's bag would be:
Driver: TM Burner TP w/ Creation AND a CT250 w/ Solution (remember most here own several)
FW: TEE CB1 - shafts are bit all over the place but the Evo or NV probably have it
Hybrid: Nickent 3dx was popular for a while for the guys not playing the Bafflers
Irons- MP-60's with DG with backup sets of Hogans and possibly a set of Pings and a set of golfsmith P2s
Wedges - Vokeys
putter- various Anser clones
bag - something ogio

the scary part is how many guys have equipment that was purchased from Lyle or Rory, went through Regina, or made a stop in Providence (where it may or may not have picked up a skymark )

Thats pretty close to a perfect list. Driver is too hard to nail down to even 2 models. Way too much varience within that particular range. Hybrids/long irons/higher lofted fairways are even more varried, not a lot of conistency from bag to bag there either.

I had a shaft mailing tube that started in Providence, went to Regina, came to Orlando, that I sent to Augusta. It just missed Wisconsin some how. One Ho'ing outlet you forgot was Global Golf. Robereno can probably list more of us in his mailing list than any other outlet mentioned. :laugh:

 

[goatster]

seems about right but i think the FT-I is starting to edge out the Burner.atleast it seems a bunch of them have surfaced lately.

 

[ezra76]

Driver - R35's or my old one.

FW woods - Either the same one they've played the last 10yrs. or "see above".

Irons - Usually Mizunos

Wedges - Vokey SM

Putter - Scrotty Cramone

 

[Topflite_D2]

seems about right but i think the FT-I is starting to edge out the Burner.atleast it seems a bunch of them have surfaced lately.

Yeah I was thinking the same thing. I think TM would edge out the FT-i because of the FT-i's bore through head. Plus the i-mix shafts cost so much I've herd.

 

[ezra76]

seems about right but i think the FT-I is starting to edge out the Burner.atleast it seems a bunch of them have surfaced lately.

Strange phenomenon. :laugh: