The Salt Vampire
...and loving it.
- Joined
- Aug 14, 2006
- Messages
- 374
- Reaction score
- 0
- Points
- 0
Recently had the Project X 6.5 put into my irons and the Spinners into my wedges. I really like the feel of them, very easy to get and keep on line, but am struggling with distance control. My ball flight is higher than with S300s that I had previously.
I think that I have diagnosed the problem. Downwind I am a half a club longer and into the wind about a half a club shorter. Crosswind my distances are about the same. It was weird at first as I would blast a nine-iron over a green and then come back a hole or two later from the distance and come up short. I have always hit a "heavy" ball that went through the wind well, but am not doing it so much with the X shafts.
It seems to make sense that because I am hitting it higher the wind will affect it that more. This seems extreme though. If I can calibrate this (and I will) it should work out.
Has anyone else experienced anything like this with a shaft or equipment change and is my logic logical?
I think that I have diagnosed the problem. Downwind I am a half a club longer and into the wind about a half a club shorter. Crosswind my distances are about the same. It was weird at first as I would blast a nine-iron over a green and then come back a hole or two later from the distance and come up short. I have always hit a "heavy" ball that went through the wind well, but am not doing it so much with the X shafts.
It seems to make sense that because I am hitting it higher the wind will affect it that more. This seems extreme though. If I can calibrate this (and I will) it should work out.
Has anyone else experienced anything like this with a shaft or equipment change and is my logic logical?