Recommend me a Shaft

[King Par]

I'm playing the UL 440 right now, at 46".

It's too light and I hate the way it feels. It just doesn't feel good to me, can't explain it. I was originally going to go to a different head, but I've hit this on the screws a few times and it feels really good and performs. So a heavier/shorter shaft should work.

I'm choking up on it consistently, and measured where I hit it best and that's two inches from the top. So I'm going to play my next driver at 44".

I need a recommendation for a shaft. I also like a boardy feeling shaft, just a personal preference.

-Low/Mid Launch
-75-100 grams
-Stiff

I've been thinking UST Proforce V.2 75 or Graman UL 680.

I know I'm overlooking a lot of shafts, any help is appreciated.

Thanks

 

[Clugnut]

Fujikura Pro95. Best heavy shaft out there, IMO.

 

[dave.]

I've hit that, but its tip stiff, the Harrison Pro 2.5 95g is a little easier. You could always try steel at 44"

 

[RickinMA]

how about looking for a closeout on one of these
Dynamic Gold Lite

trimmed I'm guessing will get you pretty close to 100grams

or, maybe one of those pink NV's you see on Ebay for $20? - a pink shafted geek would be pretty badass

 

[warbirdlover]

The good old Graf Blue (not ProLaunch Blue) is about as boardy as it gets. Not sure what weight you can get that in.

dave's Harrison suggestion.

Accuflex Evolution.

 

[Rockford35]

UL780. Just do it and forget about it.

When I had a UL680 in a driver head, it was so soft I couldn't tip it enough to give it a chance at 250cpm. One of the worst shafts I have ever swung.

NV-esque.

R35

 

[LyleG]

UL780. Just do it and forget about it.

R35

Great shaft for sure, one I would recommend without question.

The Fuji speeder 757 is always a good bet as well.

 

[Rockford35]

Great shaft for sure, one I would recommend without question.

The Fuji speeder 757 is always a good bet as well.

Yep, the 757 is a solid choice too.

R35

 

[ezra76]

If you like the 757, you should also have luck with the CompNT and the VS Proto. Pick your weight. 3 of my favorite shafts.

 

[Rockford35]

If i was to go non-Creation, I'd pick these, in order:

VS Proto 60S
UL780 250
Comp NT 65S

R35