Winter Projects??

[Fairwaysplitter3320]

Yessir!

I'll take pics as I go through. I'm also curious to see if the innerwebs were correct and the Mizzy heads are .370 parallel, if not I see a reamer in my future.

Also, I've always used Golfworks epoxy in the past but have seen some good reviews on the DevCon 2 Ton Epoxy, so I'm going to give that a go as well.

So...I have a date with a reamer. Smh!!!

 

[PaPaD]

So...I have a date with a reamer. Smh!!!

Tapered, eh?

 

[azgreg]

So...I have a date with a reamer. Smh!!!

My TE's take both.

 

[PaPaD]

My TE's take both.

Always liked that about Maltby.

 

[Fairwaysplitter3320]

Tapered, eh?

Yep, buying a carbide reamer in the morning.

 

[PaPaD]

Yep, buying a carbide reamer in the morning.

How does this work? You put a reamer bit in a drill press and then mount/lock the iron head in some kind of clamp? Or is there just a little material to be removed and you hand crank a t-shaped reamer bit?

 

[Fairwaysplitter3320]

How does this work? You put a reamer bit in a drill press and then mount/lock the iron head in some kind of clamp? Or is there just a little material to be removed and you hand crank a t-shaped reamer bit?

They are the kind with the "threads" on the inside. Hand reamer should do it. Mostly because I don't have a drill press.

 

[Fairwaysplitter3320]

 

[PaPaD]

View attachment 27391

I thought those threads were there to hold epoxy and help bond the shaft. Doesn't mean they are tapered, right? Those won't work with steel?

 

[Fairwaysplitter3320]

I thought those threads were there to hold epoxy and help bond the shaft. Doesn't mean they are tapered, right? Those won't work with steel?

They are tapered because .370 parallel shafts won't fit all the way down in them.

Not because they're threaded

 

[PaPaD]

They are tapered because .370 parallel shafts won't fit all the way down in them.

Not because they're threaded

Bummer. Well, have at it, good luck and keep us posted.

 

[Fairwaysplitter3320]

Bummer. Well, have at it, good luck and keep us posted.

Thanks bud, I think the carbide reamer is the ticket. Hoping this time tomorrow the epoxy is setting. Fingers crossed!

 

[PaPaD]

Thanks bud, I think the carbide reamer is the ticket. Hoping this time tomorrow the epoxy is setting. Fingers crossed!

Where does one buy a carbide reamer?

 

[PaPaD]

Shaft and Hosel prepping tools | GolfMechanix

 

[Fairwaysplitter3320]

Where does one buy a carbide reamer?

Our local hardware store has them as well.